(Drafting) Top Pattern #1A: Information

001

Instructions for Drafting This Pattern

The information covering how to draft this sewing pattern is contained on a number of pages - see the menu - these pages these follow on from in each in the menu order. The page you are currently on contains just the description of the garment.

See the Top-001 Series page for an overview of the series (i.e. how the tops are different).

Note on Drafting Patterns

You can follow along and practice patternmaking using free Third Scale Blocks, or you can draft the pattern full size for yourself. 

If you do not have a custom block, you can find instructions for how to draft them here: Drafting Blocks.   How to take measurements are covered on these pages: Measuring for Blocks.

If you would prefer to buy a set of Standard Blocks or Slopers, you can buy them on the Purchasing Blocks pages.  Bodice Blocks are $12, Skirt Blocks are $5, Pants Blocks $8 and a Complete Set costs $20.00.  These blocks come in sizes 6 - 22, and you can find a comprehensive list of the measurements for each size in the Measurements for Downloadable Blocks page.

Description

  • A-line hip length sleeveless top
  • Round neckline
  • Fitting in the bust, loose in the hip
  • Gathered with elastic under the bust
  • No Centre Front or Centre Back seams
  • Neckline and armholes finished with bias binding

Flat & Details

top 001a flat

  • Bodice front has side seam darts
  • Front neckline depth 275-in (7cm).
  • Back has a boat neckline with a depth of 1.75-in (4.5cm).
  • Gathered with elastic under the bust; two lines of elastic 1-inch (2.5cm) apart.
  • Neckline and armholes finished with bias binding (self fabric)
  • Hem at hipline has 4.75 inches (12cm) ease added (to the block)

Plan of Action

If you are just starting out making your own patterns, it helps to first outline a Plan of Action rather than just diving in.  The plan of action consists of looking at the Flat and any specification and making notes about what needs to be done, such as:

  • determining many pattern pieces the design requires
  • listing the pattern pieces
  • making notes on what needs to be done for each pattern piece, or groups of pattern pieces (where relevant)
  • doing any necessary calculations (e.g. how much needs to be added onto each pattern piece at the hem area)

Basically, you want to make sure you study the design and have everything you need to do laid out so that you don't overlook or forget anything.   You then refer to these notes when creating the pattern pieces.

Having said all of the above... in this very basic top, there isn't much plan required, but there are a few things worth noting down.  (If this is the first pattern you have looked at on this website and you want to see patterns where a Plan of Action makes a lot more sense, see the  Plans of Action for the four Dresses - they will give you an idea of how useful this process is for a more complicated pattern).

Although you can make all these decisions on the fly while making the pattern; but this can lead to some oversights and mistakes.  Especially when you're starting out, it is a very good practice to get into.

How many pattern pieces?

There are only two pattern pieces; the Bodice Front and the Bodice Back.

  1. Bodice Front
  2. Bodice Back

top 001a pattern pieces

Notes/Plan of Action for creating Pattern Pieces

Note that although there are only two pattern piecees, the neckline and the armholes are finished off with bias tape.  With some commercial patterns they do provide a pattern piece for making bias tape.  I do NOT create a pattern piece and then pin that onto the fabric and cut it out.  I create as many strips of bias as I can from a square of fabric, then sew them together and cut them to the length required. (I often have a few strips left over; I can sometimes use these as contrast bias on another top). Although I'm not creating a pattern for the bias, I do need to consider them in this process; the width and how they affect the seam allowance.

Things I need to keep in mind, decisions I need to make before drafting the top:

  • I need to determine whether the neckline depth means there will be a gape dart which needs to be moved into the side seam dart.
  • How much do I want to add to the circumference at the hemline?  This top is A-line rather than square, but the hem (accordingly to my flat) isn't that wide....
  • I need to determine whether the bias tape will be on the outside - i.e. part of the top, or inside as purely a finish.  See the photo below to see what I mean; this decision will determine whether or not you will need add seam allowance to the neckline and armhole.  I need to check whether the self fabric is suitable - how much stretch is in a bias. If I use a different fabric, do I want it as a contrast on the outside, or just to finish off the seam on the inside?
  • I need to determine the width of the bias tape.

Image - Finishing off with Bias Binding

The top on the left has the bias tape on the inside only.  The top on the right has the bias tape as part of the garment.

bias finish

Decisions/Actions

  • The neckline does not require countouring (for me!)
  • The bias tape will be made of the self fabric, showing on the outside and be 0.38inch | 1cm wide.  The seam allowance will also be 0.38 inch | 1cm, therefore the bias tape need to be (twice the width of the bias + twice the width of the seam allowance) = 1.57-inch | 4cm. (Having said that I usually cut my bias 2 inches | 5cm wide  and it ends up being a tiny bit wider... Given I'm making this for myself and these decisions are purely my own, it doesn't matter to me whether or not my shoulder width is a tiny fraction more than the original plan).
  • I will add at total of 4 inches | 10cm to the circumference at the hemline, distributed evenly between front and back.  This means 1 inch | 2.5cm each to the Front Bodice and the Back Bodice.

An example of how not thinking things through and not using a proper Plan of Action results in mistakes: 

This relates to Top-001d, but it shows why making your decisions beforehand in a Plan of Action, and referring to it helps.  With Top-001d, I  decided at the last minute to use a lining to finish off the armholes and neckline for Top-001d. Because I didn't refer to my notes, I ended up not thinking about the fact that I had not included seam allowance for the lining, since the bias tape on the outside doesn't require it.  I ended up with my shoulder width .75 inch | 2cm narrower than I had planned.  This made it much more difficult to turn it out to finish the top at the shoulders.

The shoulder width of this top was supposed to be 2 inches | 5.5 cm.  It ended up being 1.38 inches | 3.5cm.  If I had referred to my notes before deciding that I would use lining instead of bias tape to finish off the neckline and armhole, I would have either added seam allowance to the pattern, or stuck to the original plan.  The line of stitching that appears should not be there; I found turning the top through the shoulders to finish off sewing the lining too difficult and gave up in the end.  The narrower shoulders also mean that my bra strap shows.  I would have preferred it to be the planned width.

mistake

Outcome & Notes

This shows the original concept drawing and a photo of me wearing the garment.  Scroll down for some notes.

top 001a concept and outcome

Notes

  • The top is very comfortable, but is the wrong length.  Tops that go down to the hipline don't suit me; my 'hips' (the widest part of me) are actually my thighs, and tops finishing there do not do me any favours.   I therefore remade the top at a shorter length (see Image A below).
  • Despite not liking the length,  I decided at try making same top using shirring instead of elastic.   I had an old sarong I was going to throw out, and thought I could use the fabric for a toile.    I was originally hoping to make it dress length (to the knees), and when I realised there wasn't enough fabric in the sarong, I just kept it the same as the original pattern . My main aim was to test the shirring and didn't really expect it to work out.  (What I've read about shirring suggests you need double the amount of fullness...).  The shirring ended up just fine, and the top is really comfortable as the fabric is so soft.  I have decided to use up my other two old sarongs due for throwing out and make the dress I had been wanting.  I will use one sarong for the front,and the other for the back (see Image C).  I will use it as a nightie.

Image A: Top 001a Shorter Length

top 001a shorter

Image B: Shirring instead of elastic

test shirring

Image C: I will make a nightie from this pattern from 2 old sarongs

nightie from sarongs

Image D: Left-over bias

On another page I talked about making bias strips.  If I am going to make self bias binding for a garment, I make as much bias I can while I am at it.  I can use the leftover bias for other projects.  As you can see in the image below, I've used the leftover from the top in Image A to finish off the top made from a sarong in Image B.

left over bias


Credit for the Stock Photo I used to create the Vector Croquis on this page:

Andersonrise from 123RF Stock Photos

Copyright of original (photo) image: andersonrise / 123RF Stock Photo

Credit for the Stock Photo I used to create the Vector Croquis on this page:

Andersonrise from 123RF Stock Photos

Copyright of original (photo) image: andersonrise / 123RF Stock Photo

  1. Comments (0)

  2. Add yours
There are no comments posted here yet

Leave your comments

  1. Posting comment as a guest. Sign up or login to your account.
Attachments (0 / 3)
Share Your Location
Back to top